NATURAL GAS CONVERSION KIT MANUALFor Model FS388LPFOR OUTDOOR USE ONLY Part No. Qty Description1 RCOZZ00343A 1 Main Burner
41. Attach the NG regulator to the tee tting.(See Fig. 41)NOTE: pay attention to arrow on the NG regulator indicating direction of gas flow. The arro
FS388LP Natural Gas Conversion Kit InstructionsTools needed:Phillips head screwdriver3/4” wrench1/4” wrench or socketAdjustable wrenchWear a glove to
FS388LP Natural Gas Conversion Kit Instructions7. Remove the four (4) phillips pan head screws at both sides of the the front control panel. (See
11. Take off the front control panel, use a screw driver to remove the eight (8) screws securing the bezels and the manifold in position. (See Fig
Fig. 16Fig. 17Fig. 18Fig. 19Main burner oricePhillips Pan Head ScrewsFig. 15FS388LP Natural Gas Conversion Kit Instructions18. Push the front contro
Regulator hoseFig. 21Fig. 22Fig. 23Fig. 24Fig. 20FS388LP Natural Gas Conversion Kit Instructions23. Hold the elbow on the bottom IR burner, then use t
28. Hold the elbow and use a wrench to remove the rear IR burner orice. (See Fig. 28) 29. Replace it with the supplied NG orice and use the six scre
30. First remove the side burner grate and brass cap from the side burner tray. Then remove the two screws securing the bezel and side bur
36. Attach the left side shelf by inserting the four (4) screws on the left side of the grill head into the holes on the left shelf. (See Fig. 36) 37.
Comments to this Manuals