30" Natural Gas Conversion ManualFOR OUTDOOR USE ONLYPart No. Qty Description1 RCOZZ00115A 1 Main Burner Valve & Manifold Assembly with Valve
Be sure gas supply is off, the knobs are in the offposition and the grill is cool.1. Use a 3/4” wrench disconnect the hose from theside burner valve a
7. Pull the searing burner out a little and use anadjustable wrench to disconnect the flex line fromthe burner, then disconnect the igniter wire. (See
15. Remove all the knobs, set the knobs aside.(See Fig. 14)16. Remove the screws holding the main burnerknob bezels to the front face and remove the b
27. Place the searing burner in to the firebox, con-nect the flex line and then connect the igniter wire.(See Fig. 7 on page 3)28. Push the searing bu
Installing the NG regulatorNOTE: Make sure to use supplied pipe sealant on all non-flaredfittings.1. Attach the tee fitting to the manifold as shown.T
holding the side burner orifice holder. (See Fig.25)2. Remove the side burner orifice. (See Fig. 26)3. Remove the side burner knob. (See Fig. 27)4. Re
1. Remove the six (6) screws on the inside of thegrill that hold the rear infrared cover in place.(See Fig. 30)2. Close the grill hood slowly.3. Grasp
Comments to this Manuals