
SSoonnoommaaSSoonnoommaaSonoma Platinum Edition Grill: 30” ModelPLAPLATINUMTINUMEDITIONEDITIONTMUSE AND CARE MANUALFOR OUTDOOR USE ONLYMADE IN THE U.S
GRILL LOCATIONDo not use the grill in garages, breezeways, sheds or any enclosed area. Never operate the grill inenclosed areas as this could lead to
The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie burner is aninfrared type which provides inten
ROTISSERIE LIGHTINGOpen the lid. Push and turn the control knob for the rotisseriecounter clockwise to the “HIGH” position. Wait 5 seconds.Then press
DRIP TRAYThe drip tray should be cleaned periodically to prevent heavy buildup of debris. NOTE: Allow the drip tray to cool before attempting to clea
GENERAL TROUBLE SHOOTINGYou should inspect the burners at least once a year or immediately if any of the following conditions occur:• The smell of gas
PROBLEMGrill will not light with a match or low heat with dial setto "High" position.Flame is erraticFlare-upsBurner flame is mostly yellow
15WarrantyRMP-122-CGR30IM01/18/05Sonoma warrants this grill to the original purchaser of our grills when subject tonormal residential use to be free f
TESTED IN ACCORDANCE WITH ANSIZ21.58b-2002/CGA 1.6b-M02 STANDARD FOROUTDOOR COOKING GAS APPLIANCES.THIS GRILL IS FOR OUTDOOR USE ONLY.Check your local
2Grill Features: SGR30LP1. Roll top grill hood2. Grilling/Cooking surface3. Side Shelf4. Control knob: back infrared burner5. Control knobs: main burn
IMPORTANT: Remove all protective plastic film fromstainless steel parts prior to assembly/use. This filmis installed at the factory to prevent damage
SIDE BURNER PARTS ASSEMBLY1. Remove burner assembly from packaging. (See Fig. 7)2. Loosen the bolts on the side of the grill and attach theshelf by al
SIDE BURNER PARTS ASSEMBLY6. Install black plastic knob. (See Fig. 14 )7. Install burner and cap. (See Fig. 15-16)8. Install grate over burner. (See
L.P. GAS INSTALLATIONSonoma Gas Grills are set to operate with L.P. gas and come with a high capacity hose and regulator assembly. (Note:Only use the
GENERAL INFORMATIONAlthough all gas connections on the grill are leak tested prior to shipment, a complete gas tightness check must be per-formed at t
BEFORE LIGHTINGImportant! Before Lighting...Check the gas supply line for cuts, wear or abrasion.Always keep your face and body as far away from the
Comments to this Manuals